Construction Products

Model 500/600

500-Main

Massive Weldments / Superior Components
The Kello-Bilt Model 500/600 offset disc is specifically designed to meet the extreme conditions encountered in the construction industry. For over 25 years these rugged discs have been employed to clear land, build roads and dams, reclaim mine sites, mix and dry soils, and prepare land for reforestation throughout North America.

Exclusive Oil-Bath Bearing System
Back to back tapered bearings in large cast steel housings and sealed with floating metal oil seals. Tapered bearings are designed for thrust unlike ball bearings used by other manufacturers. Oil Bath bearings provide a low maintenance, high quality solution that is essential in any industrial application. Click here to read more about the Oil-Bath Bearing.

 

Model Number Cut Width Approx. Weight Approx. Lbs/Blade* Approx. D.B.H.P.**

500-2332B
500-2532B
600-1936B
600-2136B

12’
13’6”
12’
13’6”

12,500 lbs
13,300 lbs
14,500 lbs
15,200 lbs

595
578
853
800

250 plus
300 plus
275 plus
325 plus


*Does not include tapered furrow filler discs.
**Drawbar horsepower requirements vary with soil conditions, topography, weight added to harrow, and tractor type (steel track, rubber track, or rubber tire).

 

Click here to get the Model 500/600 Brochure

  Model 500-600 Brochure 2.45 Mb

 

Specifications

Frame............... 8" x 8" x 1/2" high strength steel tube frame, 7" x 7" x 1/2" high strength steel tube gang bars, fully welded and reinforced.

Bearings........... Oil-Bath, back to back tapered roller bearings in heavy ductile cast housing with floating Duo-Cone ® seals. The bearing operates in 90W gear oil for constant lubrication. Bearing comes complete with wear plates. Click here to read more about the Oil-Bath Bearing.

Gang Shaft....... 2 - 1/2" heated treated high strength alloy steel, threaded at both ends.

Spacing............. Model 500 - 14" fabricated heavy steel spacer spool.

                         Model 600 - 17" fabricated heavy steel spacer spool.

Disc Blades........ Model 500 - 1/2" x 32" notched disc blades front and rear.

                         Model 600 - 1/2" x 36" notched disc blades front and rear.

Hubs/ Tires........ Goodyear 385/65R22.5 Super SIngle Radial heavy industrial tires mounted on 5-spoke Dayton hubs.

Hydraulics......... 5" x 20" hydraulic cylinder complete with hoses, despth control segments and cylinder transport lock.

Standard............ 7000lb hitch jack, plated grade 8 fasteners, gang wrench (2), seperate fore/aft and transport level controls and a heavy swivel flapper hook-up.

 

 

Kello-Bilt Inc. reserves the right to change pricing and specifications without notice.

buy an essay paper | All the things you need concerning assignment help online is listed here, simply just follow it. | Последние новости тирасполя приднестровье все свежие новости.