Model 400
Massive Weldments / Superior Components
The Kello-Bilt Model 400 offset breaking disc is specifically designed to meet the extreme conditions encountered in the construction industry. For over 25 years these rugged discs have been employed to clear land, build roads and dams, reclaim mine sites, mix and dry soils, and prepare land for reforestation throughout North America.
Exclusive Oil-Bath Bearing System
Back to back tapered bearings in large cast steel houings and sealed with floating metal oil seals. Tapered bearings are designed for thrust unlike ball bearings used by other manufacturers. Oil-Bath bearings provide a low maintenance, high quality solution that is essential in any industrial application. Click here to read more about the Oil-Bath Bearing.
| Model Number | Cut Width | Approx. Weight | Approx. Lbs/Blade* | Approx. D.B.H.P.** |
| 400-1830B 400-2030B 400-2230B 400-2630B |
10' 11’ 12’ 14’ |
10,500 lbs 10,875 lbs 11,755 lbs 13,100 lbs |
583 543 534 503 |
175 - 225 200 - 225 225 - 250 300 plus |
*Does not include tapered furrow filler discs.
**Drawbar horsepower requirements vary with soil conditions, topography, weight added to harrow, and tractor type (steel track, rubber track, or rubber tire).
Click here to get the Model 400 Brochure
Model 400 Brochure
Specifications
Frame............... 7" x 7" x 3/8" high strength steel tube frame, 7" x 7" x 3/8" high strength steel tube bars, fully welded and reinforced.
Bearings........... Oil-Bath, back to back tapered roller bearings in heavy ductile cast housing with floating Duo-Cone ® seals. The bearing operates in 90W gear oil for constant lubrication. Bearing comes complete with wear plates. Click here to read more about the Oil-Bath Bearing.
Gang Shaft....... 2 - 1/2" heat treated high strength alloy steel, threaded at both ends.
Disc Blades...... 1/2" x 30" notched disc blades front and rear come standard. Optional 1/2" x 32" disc blades are also available.
Spacing............. 13" fabricated heavy steel spacer spools designed to maintain gang tightness.
Hubs/ Tires...... Goodyear 385/65R22.5 Super Single Radial heavy industrial tires mounted on 5-spoke Dayton hubs.
Hydraulics....... 5" x 20" hydraulic cylinder complete with hoses, depth control segments and cylinder transport lock.
Standard......... 7000lb hitch jack, plated grade 8 fasteners, gang wrench (2), seperate for/aft and transport level controls, and a heavy swivel flapper hook-up.
Kello-Bilt Inc. reserves the right to change pricing and specifications without notice.